Victron Energy Orion‑Tr Smart 12/12‑30A (360W) Isolated DC‑DC Charger

Victron Energy Orion‑Tr Smart 12/12‑30A (360W) Isolated DC‑DC Charger

The Victron Orion‑Tr Smart 12/12‑30A is an isolated DC‑DC charger engineered to safely charge a 12V service battery from a 12V starter battery. With full galvanic isolation, Bluetooth programmability, and high current output, it’s built for rugged mobile, marine, and off-grid power systems that require electrical separation and high reliability.

Designed for performance in extreme environments, the unit supports deep discharge recovery, engine-run detection, and silent fanless operation.

Key Specifications

• Model – Orion‑Tr Smart 12/12‑30A (Isolated)
• Charger Type – Isolated DC‑DC Converter/Charger
• Input Voltage Range – 8–17 V DC
• Output Voltage Range – 10–15 V DC (adjustable)
• Nominal Output Voltage – 12.2 V
• Continuous Output Current – 30 A @ 40 °C
• Max Output Current (10 s @ -20%) – 40 A
• Short-Circuit Output Current – 60 A
• Continuous Output Power – 360 W @ 40 °C / 430 W @ 25 °C
• Efficiency – 87%
• Output Noise – 2 mV RMS
• No Load Input Current – <80 mA
• Standby Current – <1 mA
• Galvanic Isolation – 200 VDC input-output-case
• Bluetooth – Built-in (VictronConnect compatible)
• Remote On/Off – Supported
• Parallel Operation – Not supported
• Operating Temperature – -20 °C to +55 °C (derates 3%/°C above 40 °C)
• Humidity – Max 95%, non-condensing
• Protections – Over-temp, overload, reverse polarity, short-circuit
• Ingress Protection – IP43 (electronics), IP22 (connections)
• Terminal Type – Screw terminals
• Max Cable Size – 16 mm² (AWG 6)
• Dimensions – 130 × 186 × 80 mm (5.1 × 7.3 × 3.2 in)
• Weight – 1.8 kg (4.0 lb) 
• Warranty – 5 Years Manufacturer Warranty

Benefits & Applications

• Safely charges 12 V house batteries from 12 V alternators or starter batteries
• Full electrical isolation for safety and noise suppression in sensitive systems
• Fully configurable charge settings including support for lithium, AGM, and lead-acid
• Silent operation with no fan – ideal for noise-sensitive environments
• Monitored and programmed via VictronConnect Bluetooth app
• Works with smart alternators with built-in engine detection
• Certified to IEC and CE safety and emissions standards
• Designed for mobile, marine, industrial, and remote installations